FEEDBACK for @Brendan Knight Float Turns Following up from the comment reply here is a video for you Brendan. Hopefully this helps to make sense of it. The basic process is not hard to put together; Steps 1. Squat into a ready to "GO" RSG position (squatted over pegs / arms relatively straight) 2. As you do tilt the bike away from the direction you are turning 3. Allow a slight fall towards your turning direction (you and the bike together in the V). This sets the angle. 4. RSG from this position. Major Points - There are two aspects rotation and leverage. - The angle you fall to sets the balance between rotation and leverage. - Hold tension all the way through the RSG. Big Tip!! Its much easier to do this with the front wheel raised a little. Off flat ground is quite hard to get the front high enough. Ride the front up onto a small obstacle. Your balance is good enough to do that! 😜 👍 Just play with this and let me know how you go! If you have any other questions let me know

Posted by Neil Price at 2025-09-03 08:30:10 UTC